Inteligent rotary encoder is one of the most commonly measurement components in the area of industrial automation. It mainly used in the electric motor and various automation equipment to detect angle-position and measure speed.
We provide various industrial standard increment encoders such as open-collector, push pull output. Long-distance drive and so on, which can connect most frequency converters and interface cards.
We also provide absolute encoder such as SSI, RS232, RS 485, PI, gray code, binary, multi-circle and so on. For the detail info, please contact sales department.
Parameter Value Unit Remark
Quality <180 g except wires
Working temperature -40~85 degree
Store temperature -50~125 degree
Protection grade IP55 excellent resistance of water, oil and dust ability; Allowing condensation, max IP68
Anti-vibration <600 m/s2 55-2000Hz
Anti-shock <4000 m/s2 Impact 6ms, allowing strike lightly during installation
Starting toque <6*10-3 Nm 20degree
Rotor inertia <3*10-6 kgm2
Max shaft load 60 N radial direction
80 N axial direction
Axial movement <1.5 mm measured axial
Mechanical speed <16000 rpm
Working voltage 5V / 8~36VDC Output Model Synchronous Serial SSI output
Output high level >4.5V output low level <0.4V
Current consumption <100mA MAX Load current 4mA
MAX Resolution 12 bit Measurement range 0~360deg
CLOCK 0~1MHz Working temperature -40~85 deg
CSn signal input Low level <1.5V, High level 3.5-5V CLOCK signal input Low level<1.5V, high level 3.5-5V
DATA output Binary code
MAX Rotating speed 600rpm remark Five-wire: Red-VCC, black-GND, yellow-DATA, green-CLOCK, white-CSn